Product DescriptionSpecification:Color: Red, Black, SilverMaterial: PP, Mn SteelStyle: ModernAssembly Required: YesEngine Type: Single Cylinder, Air-cooled, 2-StrokeIgnition System: Self-reset Pull StartFuel Tank Capacity: 550ml/18.6OzChain Fuel Tank Capacity: 260ml/8.8OzChain Pitch: 0.325#Bore: 45mm/1.77inchPower: 2.2kwSpeed: 10500rpmDisplacement: 52ccOil Mixture: 25:1(Gasoline: Oil)Chain Length: 50.8cm/20inchMax. Cutting Diameter: About 48cm/18.9inchProduct Size: 88*23*28cm/34.64*9.05*11.02inchPackage Size: 56*27*34cm/22.04*10.6*13.38inchGross Weight: 8.5kg/18.74 lbsPackage Included:1* Gas Chainsaw1* Chain1* Guide Bar1* Guide Bar Cover1* Fuel Mixing Bottle1* Oil Hopper1* Tool Bag1* English ManualNotes:1.Please use gasoline 90# with special 2-cycle engine oil and never use pure gasoline. Gasoline and oil mixture ratio: 25:1.2.Adjustment of oil output: the oil output can be controlled to turn larger to the left and smaller to the right.3.Please note that after the first ignition sound, closing the choke and repeatedly pulling the start handle will suck in too much fuel and prevent the engine from starting.4.If the choke knob is not fully pushed back after pulling the starter handle up to 6 times, the engine preheating may be missed. Too much fuel will flow out and submerge the spark plug. Then you can't start the chainsaw.5.The damper is used to regulate air intake. When the engine is cold or not used for a long time, the damper needs to be pulled. If the engine is hot, it can be started directly. This is the same as the principle of starting a motorcycle! Close the damper, pull the start handle again 1-3 times to start it, and then you can use it normally.
