5500R/Min 2Stroke Motor Motorized Bicycle Bike Petrol 80Cc Gas-Powered Engine

Customer note: A new engine generally requires a running-in phase of more than 500 kilometers, and the same applies when the cylinder and piston ring are damaged and need to be updated. During the running-in phase, the speed should not exceed 20km/h, and the engine should not bear excessive load. Otherwise, it will cause the engine to overheat, seize the cylinder and accelerate the wear of parts. Fuel and oil mixing ratio: 18:1 for new cars (30:1 after 500 kilometers) (This machine is a two-stroke gasoline engine with crankcase scavenging. The lubrication of the cylinder and transmission parts in the crankcase depends on the fuel system lubrication. Therefore, the fuel used by this machine is a mixture of gasoline and lubricating oil. Before the fuel is poured into the tank, Gasoline and gasoline engine oil are poured into the container according to a certain volume ratio, and mixed evenly before being poured into the fuel tank. Never pour the two kinds of oil into the fuel tank one after the other.) Features: 100% brand new and high quality Single-piece balanced crank, stroke40mm The hardware used to install the bolts is much thicker Head tilt-greater and higher compression hardware Higher power and longer service life Fully assembled 80CC 2-stroke engine Engine only-incomplete Package includes: 1 x bicycle engine only (not complete package)