Description:1. This door holder is constructed from stainless steel and a rubber bumper, the package comes with adhesive and mounting screws.2. Easy to fit and does the job, no frills-style door stop. All you need is a screwdriver.3. Note: This door stopper is suitable for a 0.08" to 0.77" gap, please kindly check your door gap before you purchase it!4. Easy Install:Method 1: Drill holes directly on the floor, insert the expansion pipe, place the doorstop, and install the screws.Method 2: Remove the self-adhesive on the back. Press against the floor or wherever you need and hold for a few seconds.Specification:Product Name: Door StopMaterial: Stainless Steel, RubberFinish: BrushedDimension: 24 x 45mm / 0.94" x 1.77" (H*D)Mounting Hole Diameter: 5mm / 0.2"Rubber Thickness: 5mm / 0.2"Package Content:2 x Door Stop, Some Install PartsPrecautions:A. Wet and dusty wall adversely to paste, you can clean and keep dry firstly.B. When the temperature is low, you can use the blower to preheat the glue face and then paste it.C. When removing the self-adhesive, be careful not to remove the adhesive layer.D. After the glue sticks, please press it several times and then use it again.
