Metal film fixed resistors are cylindrical axial resistors with a thin metal layer as the resistive element on a non-conducting body. They are used when a high tolerance or more accurate value is needed in a circuit, also used for bridge circuits, filter circuits, and low-noise analog signal circuits.Specification:Body Color: BlueMaterial: Metal Film, Electronic PartsTolerance: ±1%Power: 1/2 Watt (0.5W)Body Dimension: 9x3mm (L*Dia.)Fix Resistance Values: 10Ohm, 12Ohm, 15Ohm, 18Ohm, 20Ohm, 22Ohm, 24Ohm, 27Ohm, 30Ohm, 33Ohm, 36Ohm, 39Ohm, 43Ohm, 47Ohm, 51Ohm, 56Ohm, 62Ohm, 68Ohm, 75Ohm, 82Ohm, 91OhmPacking List: 210 x Metal Film Resistors (10pcs for Each Value)Advantage:Wide operating range, long-term stability, low tolerance, low noise, and low-temperature coefficient of resistance i.e. the resistance does not change quickly with a change in temperature.Instruction:Resistors are non-polar, meaning they don't have a direction: you don't have to worry about putting it in 'backward' because they work the same either way. Always read resistors from left to right.Notice:Metal film resistors are unsuitable for applications that expose them to surge transients. While resistors don't have their polarity they will typically be part of a circuit that does, thanks to other components like capacitors.
