Description:Pull Type, linear motion, plunger spring return, DC solenoid electromagnet.Support DC 12V voltage, high power, pull type, linear motion, is easy to install.DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility, household appliance, mechanical, etc. specification: Rated Voltage: DC 12V;Current: 1AForce:25N;Travel: 10mm;Cable Length: 190mm/7.48"Push Bar Dia: 14 x 14mm / 0.55" x 0.55'';Total Length: 69mm / 2.72";Mounting Hole Dia.: 13 x 4.5mm / 0.51"x 0.18"Mounting Hole Center Distance:28 x 32mm/1.1" x 1.26"(L*W)Size: 55 x 42 x 31mm / 2.17" x 1.65" x 1.22" (L*W*H);Package Content: 1 x DC Solenoid Electromagnet Note:Please pay attention:As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time.The best operate time is in 2 seconds.If the operate time is too long,the electromagnet temperature will rise.Too high temperature can affect the life of the electromagnet.Please take the electromagnet put down gently when you install it. The screw thread can make a corresponding change according to your demand. This product is small in size, please pay attention to in the process of using eelectricity, so as not to damaged the electromagnet.
