Specifications: Product Name: Float Switch Max Contact: Rating 10WMax Switching Voltage: 110V DCMax Switching Current: 0.5AMax Breakdown Voltage: 220V DCMax Carry Current: 1.0AMax Contact Resistance: 100mohmTemperature Rating: -10 ~ +60 C / 85 CFloat Ball Material: PPFloat Body Material: PPFloat Ball Size(Approx): 21 x 22mm(L*D)Thread Dia(Approx): M10Body Total Length: 115mm Cable Length: 40cm Color: White, Red, BlackNet Weight: 29g Package Content :1 x Float SwitchDescription: A float switch is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or other device.It can be easily converted from normally open to normally close by inverting the float.The versatility of this vertically monted sensor means that it can be installed either at the top or base of your tank,depending on whether you wish to detect the water is rise or fall.Note:because the current that the switch can carry is much little(0.5A), you must use a relay or contactor when it is connected by a load, relay and contactor are not included here. Feature: This float switch is a simple structure,easy installation liquid level controller.It does not have a complex circuit,will not be disturbed,as long as the material selection,liquid,pressure or temperture can be used in any environment.Light weight and simple working principle,high reliability.The float level switch is widely used in electronic,electrical,chemical,water treatment,drainage and other walks of life level control and alarm.
