OE Number: 158388/55111610AA/55111610AB/55111610AC/RL111610AB/R5111610ABFitmentfor Jeep Compass MK49/MP Series 2009-2017for Jeep Patriot MK74/MP Series 2009-2017for Dodge Caliber 2009 L4 1.8L/L4 2.4Lfor Dodge Caliber 2010-2012SpecificationsMaterial: SteelCompressor Style: for 6SEU16CPulley Groove Quantity: 6Voltage: 12VPackage: 1x Pulley With Bearing, 2x Snap RingssThis is a non-OEM product, accessory only!FeatureUse to repair or replace the clutch system in an automotive AC compressor on AC system, It engaging and disengaging the compressor pulley to control refrigerant flow.Steel Clutch Pulley Contains a sealed ball bearing for Rotates with the serpentine belt when the AC is off, aim for withstand constant belt friction and rotation, wear resistance and heat dissipation.Spring steel Snap Rings & Shims for Adjusts the air gap between the clutch pulley and hub, Secures components in place.Signal of a Failing AC Clutch:AC blows warm air intermittentlyUnusual grinding or squealing noisesClutch does not engage when AC is onVisible wear or damage on the clutch assemblyReplace AC Clutch if met:Worn-out clutch bearing.Damaged coil or electrical failure.Physical wear on the hub or pulley.AC compressor not engaging properlyInstallation1. Disconnect the car battery and Locate the AC compressor (usually belt-driven, near the engine)2. Remove the Serpentine Belt, Disconnect the Clutch Electrical Connector, Remove the old Clutch Assembly( deattatch center bolt, the hub, snap ring, pulley and clutch coil)3. Install the New Clutch Kit, Slide on the new pulley and secure it with snap ring, press hub onto, Adjust the Air Gap by Add or remove shims4. Reassemble & Test the AC system(no noises, cold air output)
