Multi-Purpose, Self-Levelling Floor Compound for Internal Smoothing Applications Sikafloor®-122 Level Universal is a one-part, cement-based, self-levelling compound designed to smooth and level uneven internal rigid floors prior to the application of final floor coverings. Suitable for a wide range of substrates including concrete, sand/cement screeds, and dense tile surfaces, it provides a protein-free, low-shrinkage solution ideal for both commercial and domestic environments. Key Features & Benefits Self-Smoothing: Highly fluid formulation allows for easy manual or pumped application. Fast Setting: Walkable in 2–4 hours and ready to overlay in approximately 8 hours at 20°C. Protein & Formaldehyde Free: Ideal for sensitive areas including hospitals and food preparation zones. Low Shrinkage: Reduces the risk of cracking and ensures a strong, durable base layer. Versatile Substrate Compatibility: Suitable for application over concrete, screeds (not anhydrite), ceramic tiles, terrazzo, and quarry tiles. Underfloor Heating Compatible: Can be applied beneath heating cables or pipes (not for embedding). Product Details Form: Grey powder (cement and aggregate based) Packaging: 20 kg bag Application Thickness: Featheredge to 6 mm per layer Coverage: Approx. 4 m² at 3 mm thickness per 20 kg bag Compressive Strength: >20 N/mm² (28 days) Flexural Strength: >5 N/mm² (28 days) Fire Classification: A1fl EN Classification: EN 13813 CT-C20-F5 Application Instructions Surface Preparation: Substrates must be sound, dry, clean, and free of contaminants or laitance. Prime porous substrates with SikaBond® PVA+ diluted 1:4. Non-porous substrates should be mechanically roughened and coated with undiluted PVA. Mixing: Add 3.4–3.5 L of clean water per 20 kg of powder. Always add powder to water. Mix with a spiral paddle for a minimum of 3 minutes to achieve a smooth, lump-free consistency. Application: Pour mixed material onto the floor and spread evenly with a steel trowel. Apply within 20 minutes. Use a spiked roller to remove air and improve finish. Curing: Protect from moisture and draughts for at least 24 hours. Avoid premature drying in warm conditions by misting the surface if needed. Limitations Not suitable as a final wearing surface. Do not apply over floating floors, vinyl, insulation boards, anhydrite screeds, or asphalt substrates. Do not exceed recommended thickness (6 mm per coat). For interior use only; not suitable for exterior applications or rising damp conditions. Do not use as a damp-proof membrane (DPM). Health & Safety Always wear appropriate PPE including gloves, goggles, and a dust mask during mixing and application. Refer to the Safety Data Sheet (SDS) for full guidance.
