Page description and images updated on July 28 2025Description Manual Click here to open The instruction manual is an old version and is for reference only 1 The blue part at the top is the external discharge terminal and there is a working indicator light for the corresponding channel at the bottom 2 Voltage and current curve display real time voltage and current DC two wire method to measure internal resistance 3 The U shaped on the back is combined with the PCB board and the fan actively dissipates heat to form a heat dissipation channel 4 The 18650 battery holder adopts a compact design which is suitable for measuring flat head batteries 5 Channel type 8 independent channels each channel is unrelated runs independently and does not affect each other 6 Channel synchronization supports 8 channels to set synchronization and the parameters of each channel can be set separately 7 Cyclic charge and discharge In automatic mode only one cycle of charge discharge charge is supported and multiple cycles are not supported Feature 1 Working voltage DC5V 10A non standard power supply not included overvoltage will burn the machine2 Power interface ①DC 5 5 high current interface ②5V positive and negative welding points3 Power reverse protection reverse protection reverse power supply prohibited① Automatic mode program starts charge with a charging stop voltage of 4 2V the charging current is less than the stop current for 30 seconds the first charg
