Motoforti
Brass Pipe Fittings 1/4"Male Double Male Threaded Elbow 1.06" 2 Pcs
Specifiche
MarcaMotoforti
CondizioneNuovo
Descrizione
Professional Pipe Fittings:The fitting is strength, low carbon content (brass is too flimsy and will broke in use), which can be connected to copper, brass, plastic, aluminum, and welded steel; Can use widely for fuel equipment, plumbing, gas, refrigeration, and vacuum applications, it also good for any home brewing applicationEven in humid environment, it still has strong oxidation resistance and does not corrode.Stainless steel can withstand high temperatures as well as low temperatures.Specification: Material: Brass Thread: 13.5mm / 1/4"Male Length: 27mm / 1.06" Color: Gold Tone Working Temperature: -100 to +660 degrees Key Installation Steps: 1. Seal: Apply tape (2-3 clockwise wraps) or sealant paste to nipple threads. 2. Hand-Tighten First: Screw connector into first fitting by hand until snug. 3. Wrench-Tighten First: Hold fitting, turn connector 1-2 full turns past hand-tight (avoid over-tightening). 4. Seal & Hand-Tighten Second: Apply sealant to exposed adapter threads. Hand-tighten second fitting. 5. Wrench-Tighten Second: Hold adapter, turn second fitting 1-2 full turns past hand-tight. Check Alignment: Ensure pipes/fittings are straight. Pressure Test: Test system for leaks (e.g. soapy water) before use. Never test gas lines without a professional. Tools: Two wrenches, tape or sealant paste. Crucial: Use sealant. Avoid over-tightening. Pressure test is essential. Packing Includes:2 Pcs Double Male Threaded Elbow
Storico prezzi
Ricevi una notifica se il prezzo scende
Ti invieremo un'email quando il prezzo di questo prodotto diminuirà.
- Aggiornamenti dei prezzi in tempo reale
- Oltre 50 negozi monitorati
- Avvisi gratuiti di calo prezzo
- Solo negozi verificati
Avvisami quando il prezzo scende sotto: 11,47$
Prodotti simili
Una selezione di prodotti che potrebbero interessarti. Guarda tutti
Brass Pipe Fittings 3/8"Male X 1/4"Male Double Male Threaded Elbow 1.18" 2 Pcs
12,82$
Brass Pipe Fittings 1/4"Male| X 1/8"Male Double Male Threaded Elbow 63/64" 2 Pcs
11,98$
Brass Pipe Fittings 1/2"Male X 3/8"Male Double Male Threaded Elbow 1.38" 2 Pcs
15,01$
Brass Pipe Fittings 3/8"Male Double Male Threaded Elbow 1.14" 2 Pcs
12,95$
Brass Pipe Fittings 1/4"Female Double Female Elbow 1.06" 2 Pcs
11,98$
Brass Pipe Fittings 1/4"Male Double External Thread 45 Degree Elbow 1.42" 2 Pcs
15,79$
Brass Pipe Fittings 1/2"Male Double External 45 Degree Elbow 1.85" 2 Pcs
19,71$
Copper Electroplated Pipe Fittings 3/4"Male Double Male Threaded Elbow 1.85"
16,81$
