Flush-Fit Bolt-Down Post Shoe (Bolt Secure, Oxide Red) provides a strong, tidy way to fix timber posts to existing concrete, brick or timber surfaces—without digging or casting new footings. The low-profile, flush-fit base sits neatly at edges and corners, while opposed clamping bolts lock the post rigidly in place. A wide bolt-down plate spreads load for a secure, above-ground installation that helps protect post ends from moisture. Key Features & Benefits Flush-Fit Base: Low-profile design sits neatly at edges and against walls for a clean finish. Bolt-Secure Clamping: Opposing through-bolts grip the post for a rigid, twist-resistant hold. No-Dig Installation: Fix directly to concrete, brick or timber decks to avoid excavation. Durable Finish: Oxide red coating offers corrosion resistance and a professional look. Protects Timber Ends: Raises posts off the ground to help reduce rot risk. Product & Technical Details Type: Flush-fit bolt-down post shoe (bolt-secure clamp) Material: Heavy-gauge steel Finish: Oxide red coating Fixing: Anchor bolts/screws through the base (not included); opposed bolts clamp the post Applications: Fencing, pergolas, carports, handrails, decking balustrades—especially near edges/returns Available Sizes To Suit Post Size (mm) To Suit Post Size (inch) 50 × 50 2 × 2 75 × 75 3 × 3 100 × 100 4 × 4 150 × 150 6 × 6 Instructions for Use Position the shoe; mark and drill the substrate for suitable anchors. Fix the base plate securely so it sits flat and flush to the edge as required. Insert the post, plumb and square it; tighten clamping bolts evenly. Re-check alignment after initial settling and at routine maintenance intervals. Limitations & Precautions Select anchors and shoe size to suit design loads; seek structural guidance for high uplift/lateral forces. Use corrosion-appropriate anchors; inspect more often in coastal/aggressive environments. Cut post ends square and treat end grain with preservative before clamping. A neat, low-profile bolt-down solution that secures posts firmly at edges and corners—fast to install, corrosion-resistant and ideal where clean lines and above-ground fixing are required.
