Reinforced Aluminium Foil Tape - 45M X 50Mm

Reinforced Aluminium Foil Tape is a professional-grade sealing and joining tape for HVAC and insulation work where added strength is required. An integral fibre mesh toughens the foil for stronger joints, while a peel-away liner ensures clean, accurate application. The tape forms a durable, heat- and moisture-resistant seal on smooth, dust-free surfaces. Key Features & Benefits Reinforced Strength: Integral fibre mesh resists tearing and supports tougher joints. Heat & Moisture Resistant: Creates durable, air-tight seams on ducts and foil-faced insulation. Clean Application: Peel-off release paper for precise placement with minimal wrinkles. Reflective Foil Face: Assists with radiant heat reflection at joints and seams. Product & Technical Details Type: Reinforced aluminium foil joining & sealing tape (self-adhesive) Colour/Finish: Silver, reflective foil Size: 45 m length × 50 mm width Liner: Peel-off release paper Pack Size: 1 roll Suitable Applications Sealing HVAC ducting seams and end caps Joining foil-faced insulation boards and quilts General sealing around vents, pipes and building services Instructions for Use Ensure substrates are clean, dry and free from dust, oil and release agents. Measure and cut; peel a short section of liner to start and align the tape. Apply with firm, even pressure from the centre outward; remove the liner progressively to avoid creases. Overlap joints by at least 25 mm; press down with a roller or squeegee for best adhesion. Limitations & Precautions Not a structural fixing; do not use where mechanical fastening is required. Adhesion may be reduced on damp, dusty, textured or low-energy plastics—test small areas first. Apply in dry conditions; avoid prolonged water immersion or direct flame contact. Reinforced Aluminium Foil Tape (45 m × 50 mm) delivers a clean, durable, reflective seal for insulation joints, ducting and pipework in building services and refurbishment projects.