6Pcs 0280156029 Flow Matched Fuel Injector For Ford Explorer 4.0L 2001-2002 For Ford For Ranger 4.0L 2001-2003 For Mercury Mountaineer 4.0L 2002

Specification: O-Rings Included: Yes, preinstalled Orifice Type: 4 holes disc Connector Type: EV1 Voltage: DC 12V OE Number: 62256,0280156029, 1L2E-B5A,1L2Z-9F593-BA,CM-4963 Pin Number: 2 Dimension: 6.1x3.1x2cm / 2.40"x1.22"x0.79"(L*W*H) Flow rates at 43.5 psi / 3 bar20 lb per hour150.7 G per min.(N-Heptane)209.6 cc per min Note: This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools! Please check the fitment section of this listing before you bid. Please kindly check again your engine volume! This is a non-OEM product, accessory only! Fitment: for Mercury Mountaineer Base 4.0L V6 - Gas 2000 2001 for Ford for Ranger Edge, XL, XLT 4.0L V6 - Gas 2001-2003 for Ford Explorer Limited, Sport, XL Fleet, XLS, XLT 2000 2001 for Ford Explorer Sport Base 4.0L V6 - Gas 2001 2002 for Ford Explorer Sport Trac Base 4.0L V6 - Gas 2001 for Ford Explorer Sport Trac XL 4.0L V6 - Gas 2002 for Ford Explorer Sport Trac XLS 4.0L V6 - Gas 2003 Installation: Step 1: Make sure the engine is cool down. Disconnect the battery. Step 2: Remove the bolts and brackets from the fuel rail. Step 3: Disconnect the plug on each injector. Step 4: Lift the fuel rail and remove the injector from the fuel rail. Step 5: Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes. Step 6: Bolt down the fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery. Step 7: Double check for fuel leaks before and after starting the engine.