Descriptions: V-Belts are the most common type of drive belt used for power transmission. They provide the best combination of traction, speed transfer, load distribution, and extended service life. Made of neoprene rubber material, high-temperature resistance, wear resistance, corrosion resistance, high coefficient of friction. The outside fabric wrap is treated with highly oil and heat resistant. Tensile cords made of rigid polyurethane are embedded in the rubber for strength and reinforcement. Fit for many industrial applications, agricultural machinery, engineering machinery, etc. Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys and shaft too great. How to measure the length of the required belt: Wrap the rope around the two pulleys Make a mark Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt Specification: Type: A-Section Material: Fiber, Rubber, PU Top Width: 13mm Thickness: 10mm Outside Circumference: 1580mm Inner Circumference: 1524mm Package Content:1 x Drive Belt
