Description: Direct replacement of your old injector and no modification needed. The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector. Specification: O-Rings Included: Yes, preinstalled Orifice Type: 4 holes disc Material: Metal, Plastic Color: Blue Voltage: DC 12V OE Number: 0280155830, 62686, 91860600, 874430 Pin Number: 2 Dimension: 7.3x2.9x2cm / 2.87"x1.14"x0.79"(L*W*H) Flow rates at 43.5 psi/3 bar 34.6 lb per hour261.2 G per min.(N-Heptane)363.3 cc per min Note: This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools! Please check the fitment section of this listing before you bid. Please kindly check again your engine volume! This is a non-OEM product, accessory only! Fitment: for Volvo C70 2.3L 1999-2004 for Volvo V70 2.3L 2.5L 1999-2004 for Volvo S60 2.3L 2.5L 2001-2004 for Volvo S80 2.3L 2.5L 2004-2006 Package Included:1 x Fuel InjectorInstallation: Step 1: Make sure the engine is cool down. Disconnect the battery. Step 2: Remove the bolts and brackets from the fuel rail. Step 3: Disconnect the plug on each injector. Step 4: Lift the fuel rail and remove the injector from the fuel rail. Step 5: Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes. Step 6: Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery. Step 7: Double check for fuel leaks before and after starting the engine.
