Aluminium Foil Tape - 45M X 75Mm

Aluminium Foil Tape is a professional-grade sealing and joining tape for HVAC and insulation work where moisture resistance, thermal conductivity, flame resistance, and light/heat reflectance are important. It installs cleanly thanks to a peel-away backing paper and provides a weather-resistant seal on smooth, dust-free surfaces. Key Features & Benefits Flame Retardant & Weather Resistant: Suitable for demanding building and services environments. Heat & Moisture Resistant: Designed for warm-side insulation joints, ducting and pipework. Clean Application: Backing paper enables accurate placement and fewer wrinkles. Reflective Foil Face: Helps reflect radiant heat and light at joints and seams. Product & Technical Details Type: Aluminium foil joining & sealing tape (self-adhesive) Colour/Finish: Silver, reflective foil Size: 45 m length × 75 mm width Liner: Peel-off release paper Pack Size: 1 roll Suitable Applications Joining foil-faced insulation boards and quilts Sealing HVAC ducting seams and end caps General sealing around pipes, vents and services Instructions for Use Ensure substrates are clean, dry and free from dust, oil and release agents. Measure and cut the tape; peel a short section of the liner to start. Apply with firm, even pressure from the centre outward; remove the liner progressively to avoid creases. Overlap joints by at least 25 mm; press down with a roller or squeegee for best adhesion. Limitations & Precautions Not a structural fixing; do not use where mechanical fastening is required. Adhesion may be reduced on damp, dusty, textured or low-energy plastics—test small areas first. Apply in dry conditions; avoid prolonged water immersion or direct flame contact. Aluminium Foil Tape (45 m × 75 mm) delivers a clean, durable, reflective seal for insulation joints, ducting and pipework in building services and refurbishment projects.