LED Strip Dimmer, DC 12V To 24V 6A Rotary Brightness Adjustable Controller Lamp Switch With Wire Leads For Single Color Strips, White

What is this?This dimmer switch widely used for controlling the brightness and the flash of LED strip and rope lights in indoor areas. Suitable for home lighting, accent lighting, and decorative lighting setups. Whether you want to create a cozy atmosphere or highlight specific areas, these controllers offer precise brightness control.What will I get?Color: WhiteRating Voltage: DC 12V to 24VCurrent: 6ARating Power: 12V<75W, 24V<144WLED Switch Size: 53x18x3mm / 1.9 inch x 0.51 inch x 0.16 inchTotal Length: 230mm / 9.06 InchPackage Content: 1 x LED Strip DimmerAre there any advantages of the product?The LED dimmer is designed with ABS plastic, which is very durable and insulating.Knob operation controls 0% - 100% dimming, no flicker at low brightness, no rapid changes, avoiding visual impact on eyes caused by instantaneous changes in brightness.How to use it?1. Connect the load line first, then the power line (please make sure that there is no short circuit between the connecting lines before powering on);2. Turn the knob to the right, the brightness gradually becomes brighter, and turn to the far right, the brightness is the highest. Operate the other way around, when it turns to the far left, the light goes out.What should I notice?Please try to avoid dust environment and water environment when using the device. Also, please attention that this is not applicable for LED lights with the modes feature.