Specification Brand iFlightItem Name 1S 6 port PH2 0 ChargerColor WhiteInput Voltage 5V 15VOutput Voltage 4 35VOutput Current 1000mA per port 6A total for all six ports working simultaneouslyWeight 27gDimensions 56 35 11 5mmApplicable Batteries 1S LIHV PH2 0 PlugCharger Usage and Operation Instructions 1 When using this charger ensure the charger adapter output power is greater than 30W and the charger supports the PD3 0 protocol Use a high quality data cable for optimal performance 2 This charger defaults to 1S LIHV 4 35V battery type with a single channel charging current of 1000mA All six channels can work simultaneously It takes approximately 21 minutes to fully charge six 1S 300mAh batteries from 3 5V to 4 35V 3 Power on the charger first then connect the battery to be charged Do not connect the battery first and then power on the charger otherwise the charger may not supply power 4 After powering on the charger connect the battery to begin charging The LED will be red during charging and green when fully charged Charging will automatically stop when fully charged 5 Supports charging voltage adjustment Supports single channel adjustment to charge 4 2V LIPO lithium batteries Shorting the jumper on the rear panel port is required Precautions 1 It is recommended to use a PD 30W or higher charging adapter to achieve optimal charger operation 2 Maintain good ventilation and keep away from flammable materials during charging 3 Do not use batter
