Uxcell 256Mil Car Butyl Foam Heat Sound Damping Deadening Mat Sound Deadener Heat Insulation Mat Pad Door Roof Sound Barrier - 14

Description: Made of butyl material for heat resistance. This material eliminates vibrations and reduces general noise and rattle of the vehicle allowing for higher comfort. Self-adhesive sound dampening material is easy to install. It is designed in a handy size which makes it easier in terms of cutting. Block transmit sunlight, engine, and exhaust pipe heat to the cab, reducing air conditioning energy consumption. Installation: Decide what part you want to insulate first: car roof, car floor, car doors or a hood. Remove the remains of the factory insulation once you have dismantled the interior. Properly clean and degrease the surface prior to installation of the mat. Measure the pre-cleaned surface of the prospective spot that you are going to treat. Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper. When your sheet is ready to use, lay that down on the surface and let it stick. Flatten the sheet with your hands to avoid air bubbles. Use a roller for rolling down the foil as a neat step. Installation Notices: Please clean the surface you want to paste. You could heat it to make it soft, then compact it by hand. If the room temperature is below 5 degrees Celsius, first lamp heating it until soft. It would be best to wear protection when working. Package Include:1 x Heat Sound Deadener Insulation Mat