70Pcs Dent Puller Kit, Body Repair Dent Removal Tools, Paintless Dent Removal Kit With T-Bar Dent Puller

Features:Made of fine quality material, long-lasting to use.Can help you repair the dents on your car.It will not harm the painted surfaces.Suitable for the sheet metal processing of automobile, refrigerator, motorcycle, washing machine, etc.Package included:12x Red Tabs28x Blue Tabs1x Long Puller1x Gold Puller(Metal)7 x Pulling bridge set2x Shovel1x Glue Gun(US Plug)5x White Glue Sticker5x Yellow Glue Sticks1x Towel1x Alcohol Bottle(Alcohol not included)1x The Instruction1x Tools bag1x Hammer10x Knocking pen4 * blue tabs (2 Size)2 * holder (2 Size)Steps for usage:1. Clean the surface with a clean damp cloth.2. Stick the glue stick on the gun, turn on the power, and warm up for 5-10 minutes.3. Choose the glue pull tab according to the size of the dent, then put the heated glue on the pull tab, immediately put the pull tab in the center of the dent and keep it until it sticks.4. Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes, and it should be slightly shorter in winter.5. After the glue cools, align it with a golden dent lifter or dent puller, and press the puller to pull up the dent. Repeat the above steps until the dent disappears.6. After the dents are completed, use 95% alcohol to clean the remaining glue on the surface of the car body with a plastic shovel.7. Repeat the above steps until the dent is repaired.Question: The glue is not strong, the glue is debonded, what is the reason?1. The viscosity of hot melt adhesive is related to the temperature. The ideal temperature is 20°C-28°C.Note: Do not operate under the sun in summer, and the operating temperature in winter is above 10 ℃ (if the weather is very cold, you can first pour hot water on the wagon in the recess).2. If the car has been waxed or plated with crystal film or the material of the recess is not iron sheet, the stickiness of the tape will be greatly affected.3. It may be that the product is dusty during use. Before use, it is best to use alcohol to clean the rubber strip, the dent surface and the gasket.4. If it is degummed during operation at ideal temperature, this is a normal phenomenon, and it only needs to repeat the operation.If the depression cannot be repaired after repeated operations, it may be that the puller is not suitable for processing the depression. This is related to the shape, position and size of the depression. Not all depressions can be repaired with one product, which has nothing to do with the glue.Iron Alloy