Gasoline Engine Water Pump 1 Inch, 1.7HP 2-Stroke Engine, Gas Powered Water Pump 98.43Ft Lift, Gasoline Engine Water Pump 20Ft Suction, Water Transfer

Gasoline Engine Water Pump 1 inch, 1.7HP 2-stroke Engine, Gas Powered Water Pump 98.43ft Lift, Gasoline Engine Water Pump 20ft Suction, Water Transfer PumpKey FeaturesSturdy & Reliable: This product is made of high-end carbon steel, aluminum alloy, and plastic through plastic spraying and baking paint treatment, which is corrosion-resistant, rustproof, not easy to age or crack, and has a long service life.Strong Power: Our product is equipped with a 2-stroke gasoline engine, with an output power of up to 1.25KW, which can continuously and stably pump clean water or slightly polluted liquids.High Efficiency: It has a lift of up to 98.43 feet and a flow rate of 35.66gal/min, which can quickly complete irrigation, drainage, or water intake work, saving time and improving work efficiency.Thoughtful Design: The product is equipped with shock-absorbing and noise-reducing shells, which can reduce vibration and noise during use, making the working environment more pleasant. The external framework allows you to fix it in the appropriate position for work, ensuring use.Easy to Operate: The hand-pulled start-up method and detailed instructions allow you to quickly master how to use this product.DetailsOil Bottle & Funnel: A large-capacity oil bottle and a properly sized funnel can help you quickly complete refueling tasks.Filter: You can install it at the end of the water pipe (not included) to intercept impurities in the water and prevent product blockage.Sturdy Feet: 4 feet provide stable support for this product, making it less prone to shaking.Air Cleaner: It can prevent impurities from entering the engine. ApplicationThis product can be widely used in irrigation, landscaping, urban maintenance, drainage, water supply, reservoirs, swimming pools, and other places.Specification Material: Carbon Steel, Aluminum Alloy, PlasticProcess: Plastic Spraying, Baking PaintColor: Red+BlackAssembly Required: YesMount Type: floor-mountedCooling Method: Air Cooling+Built-In FanEngine Type: 2-Stroke Single Cylinder Gasoline EngineFuel Type: #90 and Above Unleaded Gasoline (Not Included)Oil Type: Two-Stroke Garden Machinery Special Oil (Not Included)Startup method: Hand-pulledPower: 1.25KW/1.7hpMax. Speed: 8500RPMDisplacement: 43CCGasoline Oil Ratio: 25:1Fuel Consumption: ≤610g/1.34lbs/KW.hSuction: 6-8m/19.69-26.25ftLift: 30m/98.43ftFuel Tank Capacity: 1200ml/0.32galFlow Rate: 135L/35.66gal/ minInlet/Outlet Diameter: 25mm/1inSelf-suction(3m/9.84ft): ≤8sProduct Size: 36*28*32cm/14.2*11*12.6inPackage Size: 43*33*33cm/16.93*12.99*12.99inGross Weight: 9.5kg/20.94lbsNet Weight: 7.5kg/16.53lbsPackage Included1 * 2-stroke Engine Water Pump1 * Funnel1 * Filter1 * Oil Bottle1* Air Cleaner1 * English ManualOther Assembly AccessoriesNotes1.Please read the operating manual completely before use. And pay particular attention to the safety instructions included. 2.Please use this product in a well-ventilated environment.3.For the first use, please choose genuine two-stroke garden machinery special engine oil and mix the gasoline and engine oil (not included) according to the mixing ratio indicated on the oil.4.Before starting, please fill the water cap above the water pump with water, close the air door, and then open the air door to increase the speed.5.Please idle for 2-3 minutes after each work, and turn off the engine after the temperature drops to improve its service life.6.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.Aluminum Alloy