Clutch Motoforce Racing Adjustable 105Mm Minarelli Until 1998

Racing clutch for scooters Clutch Motocforce Racing Evolution 105mm for Minarelli before 1998 - is a steplessly adjustable three-shoe clutch with the option of adjusting spring tension. The clutch comes with two sets of clutch springs in different strengths. The spring preload is adjusted with this clutch via an Allen screw on the back, so without having to dismantle the clutch from the torque drive pulley. You'll only need a hex wrench. The matching 105mm clutch bell is of course also available in our store. And the blocking tools needed for installation and removal. Note: From 1998 Minarelli engines were equipped with different clutches. So please check if your clutch has 2 shoes (d. = 105mm) or 3 shoes (d. = 107mm) or measure the inner diameter. This clutch is suitable for Minarelli engines up to 1998, with a clutch bell diameter of 105mm, or original 2-shoe clutch. Adjusting the Motoforce Evolution clutch The spring tension of this clutch is adjusted via an Allen screw on the back, without having to remove the clutch from the rear pulley. Furthermore, the clutch spring holders can be removes, so the springs can be changed quickly and without effort. Details Motoforce Racing Clutch Racing clutch with adjustable spring preload Diameter 105mm Including 2 sets clutch springs For scooters with Minarelli engine