Planet GS-4210-16P4C Network Switch Managed L2/L4 Gigabit Ethernet (10

A Perfect Managed PoE+ Switch with Advanced L2/L4 Switching and SecurityThe GS-4210-16P4C is s a cost-optimized. Gigabit PoE+ Managed Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 16 10/100/1000BASE-T ports featuring 36-watt 802.3at PoE+ and 4 additional Gigabit TP/SFP combo ports. With a total power budget of up to 220 watts for different kinds of PoE applications. the GS-4210-16P4C provides a quick. safe and cost-effective Power over Ethernet network solution for small businesses and enterprises.Cybersecurity Network Solution to Minimize Security RisksThe GS-4210-16P4C supports SSHv2 and TLS protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping. IP Source Guard. dynamic ARP Inspection Protection. 802.1x port-based network access control. RADIUS and TACACS+ user accounts management. SNMPv3 authentication. and so on to complement it as an all-security solution. Redundant Ring. Fast Recovery for Critical Network ApplicationsThe GS-4210-16P4C supports redundant ring technology and features strong. rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology. Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments.Built-in Unique PoE Functions for Powered Devices ManagementAs it is the managed PoE switch for surveillance. wireless and VoIP networks. the GS-4210-16P4C features the following special PoE management functions:- PD Alive Check- Scheduled Power Recycling - PoE Schedule- PoE Usage Monitoring- PoE Extension Intelligent Powered Device Alive-CheckThe GS-4210-16P4C can be configured to monitor connected PD (powered device) status in real time via ping action. Once the PD stops working and responding. the GS-4210-16P4C will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source. thus reducing the administrator’s management burden.Scheduled Power RecyclingThe GS-4210-16P4C allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specified time each week. Therefore. it will reduce the chance of IP camera or AP crash resulting from buffer overflow.PoE Schedule for Energy SavingsUnder the trend of energy savings worldwide and contributing to environmental protection. the GS-4210-16P4C can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. It also increases security by powering off PDs that should not be in use during non-business hours.PoE Usage MonitoringVia the power usage chart in the web management interface. the GS-4210-16P4C enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus. it greatly enhances the management efficiency of the facilities.802.3at PoE+ Power and Ethernet Data Transmission Distance ExtensionIn the “Extend” operation mode. the GS-4210-16P4C operates on a per-port basis at 10Mbps duplex operation but can support 36-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature. the GS-4210-16P4C provides an additional solution for 802.3at/af PoE distance extension. thus saving the cost of Ethernet cable installation.Environmentally-friendly. Smart Fan Design for Silent OperationThe GS-4210-16P4C features a low noise design and an effective ventilation system. It supports the smart fan technology that automatically controls the speed of the built-in fan to reduce noise and maintain the temperature of the PoE switch for optimal power output capability. The GS-4210-16P4C is able to operate reliably. stably and quietly in any environment without affecting its performance.IPv6/IPv4 Dual Stack ManagementSupporting both IPv6 and IPv4 protocols. the GS-4210-16P4C helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Robust Layer 2 FeaturesThe GS-4210-16P4C can be programmed for advanced switch management functions such as dynamic port link aggregation. 802.1Q VLAN and Q-in-Q VLAN. Multiple Spanning Tree protocol (MSTP). loop and BPDU guard. IGMP snooping. and MLD snooping. Via the link aggregation. the GS-4210-16P4C allows the operation of a high-speed trunk to combine with multiple ports. and supports fail-over as well. Also. the Link Layer Discovery Protocol (LLDP) is t