Cylinder Kit Mxs Racing 70Cc 12Mm Pin Minarelli Vertical

MXS Racing aluminium cylinder 70cc aerox Racing 70cc cylinder from MXS Racing (racing division of Maxiscoot). The MXS 70cc racing cylinder is made of aluminum, the sleeve is of course Nikasil-coated. It has 7 transfer ports and an oval exhaust, as a standard bridged exhaust typically used on high-end cylinders would reduce the port's cross-section too much due to the extremely narrow stud spacing of vertical Minarelli engines. The cylinder kit comes with a 1-ring piston with 12 mm piston pin, as well as the specially developed high compression cylinder head. Performance MXS high-end cylinder Even the most demanding riders will be impressed with 18.5 hp at the rear wheel without any cylinder modifications. That’s definitely a first! To exploit the full potential of the cylinder, we recommend using a 21-28mm carburetor, big valve reeds, an internal rotor ignition and a racing crankshaft. As the port timings are relatively high (196°/132°/134°), using the right exhaust is of course essential. We recommend the MXS Racing (MXS314) or the Stage6 R1400 (S6-9516808). The cylinder kit is supplied with all the parts required for installation. In order to achieve maximum performance and durability, it is important to measure and adjust the squish clearance. (approx. 0.6mm). Scope of delivery MXS Racing 70cc 70cc aluminum cylinder with Nikasil coating 1-ring piston with 12mm piston pin High compression aluminum cylinder head Stud bolts for exhaust assemby Gasket set